湖北农业科学 ›› 2020, Vol. 59 ›› Issue (16): 149-152.doi: 10.14088/j.cnki.issn0439-8114.2020.16.034

• 信息工程 • 上一篇    下一篇

型孔式排种器的设计与试验

陆伟安1, 黄世明1, 冯天玉1, 程捷1, 郝文斌1, 王本义2   

  1. 1.湖北工业大学,武汉 430068;
    2.湖北中轩科技有限公司,湖北 黄梅 435501
  • 收稿日期:2020-03-16 出版日期:2020-08-25 发布日期:2020-10-09
  • 通讯作者: 黄世明(1964-),男,湖南汩罗人,高级工程师,主要从事先进制造工艺与设备研究,(电话)13607160835(电子信箱)2028287129@qq.com。
  • 作者简介:陆伟安(1988-),男,广西贵港人,在读硕士研究生,研究方向为农业设备,(电话)17878125968(电子信箱)2273060723@qq.com

Design and test of hole-type seed meter

LU Wei-an1, HUANG Shi-ming1, FENG Tian-yu1, CHENG Jie1, HAO Wen-bin1, WANG Ben-yi2   

  1. 1. Hubei University of Technology, Wuhan 430068, China;
    2. Hubei Zhongxuan Technology Co., Ltd., Huangmei 435501, Hubei, China
  • Received:2020-03-16 Online:2020-08-25 Published:2020-10-09

摘要: 排种器是水稻直播机的核心部件,其性能直接影响水稻直播机的作业效果。首先,通过对排种器类型简述从而选定合适的排种器类型,并对排种器主要参数进行计算;其次,对排种器在工作过程中产生的受力进行分析;最后,进行台架试验,验证了排种器设计的合理性。结果表明,该排种器设计符合水稻直播机播种农艺要求。

关键词: 水稻直播机, 排种器, 设计

Abstract: The seed meter is the core component of the rice direct seeder,and its performance directly affects the operation of the rice drill. Firstly,selected the type of seeder by briefly describing the type of seeder,and calculated the main parameters of the device. Secondly,the stress generated by the seed meter in the working process was analyzed. Finally,the bench test was carried out. The rationality of seed meter design was verified. The results showed that the design of this device conforms to the agronomic requirements of rice direct seeding.

Key words: rice direct seeding machine, seeder, design

中图分类号: