湖北农业科学 ›› 2018, Vol. 57 ›› Issue (17): 70-74.doi: 10.14088/j.cnki.issn0439-8114.2018.17.018

• 园艺·特产 • 上一篇    下一篇

制丝工艺参数对卷烟主流烟气苯并芘释放量的效应分析

肖克毅, 戴亚, 杨文敏, 陈昆燕, 汪长国   

  1. 重庆中烟工业有限责任公司技术研发中心,重庆 400060
  • 收稿日期:2018-05-15 出版日期:2018-09-10 发布日期:2020-04-02
  • 通讯作者: 汪长国(1977-),男,安徽宿松人,研究员,硕士,主要从事烟草、烟草化学研究,(电话)13568865233(电子信箱)723692142@qq.com。
  • 作者简介:肖克毅(1985-),男,四川成都人,工程师,硕士,主要从事烟草化学研究,(电话)13880494285(电子信箱)easy09@163.com。
  • 基金资助:
    中国烟草总公司2012年度科技面上项目“卷烟产品系统设计与减害技术集成研究”(中烟办[2012]122号)

Effects Analysis of Spinning Process Parameters on B[a]P in Cigarette Mainstream Smoke

XIAO Ke-yi, DAI Ya, YANG Wen-min, CHEN Kun-yan, WANG Chang-guo   

  1. Technical Research Center,China Tobacco Chongqing Industrial Co.,Ltd.,Chongqing 400060,China
  • Received:2018-05-15 Online:2018-09-10 Published:2020-04-02

摘要: 为考察主流烟气苯并芘释放量受不同卷烟制丝工艺参数[切丝宽度(X1)、HT工作蒸汽压力(X2)、热风温度(X3)、热风风门开度(X4)、筒壁温度(X5)和筒体转速(X6)]的影响规律,运用均匀设计法制备不同试验样品,用二次多项式逐步回归法建立模型,通过分析单因素效应、双因素效应、边际效应,并进行参数优化和试验验证,明确了卷烟6种制丝工艺参数对主流烟气苯并芘释放量的影响。结果表明,6种参数对卷烟主流烟气苯并芘释放量的影响顺序为X3>X1>X5>X6>X4>X2;两两因素交互作用明显的有X3X5X4X6X5X6;X3对主流烟气苯并芘的影响最显著,随X3的增大主流烟气苯并芘释放量下降明显。

关键词: 卷烟, 均匀设计法, 苯并芘, 制丝工艺

Abstract: A mathematical model and model analysis were applied to investigate the influence of cigarette spinning process factors on B[a]P yield in cigarette mainstream smoke, including cutting width(X1), HT working steam pressure(X2), air temperature(X3), hot air damper opening degree(X4), the temperature of the tube wall(X5) and cylinder speed(X6). The single factor effect, double factor effect and marginal effect were analyzed. The results showed that, the order of the effect of six factors on the B[a]P yield was:X3>X1>X5>X6>X4>X2; the two obvious interacting factor pairs were:X3 and X5X4 and X6X5 and X6;The most significant effect is X3 on cigarette mainstream smoke of B[a]P, and with the increase of X3,B[a]P release in mainstream smoke decreased significantly.

Key words: cigarette, mathematical model, B[a]P, spinning process

中图分类号: